How to Use the Trinity Wrinkle Reducer

Each treatment should last no longer than twenty one (21) minutes. Treat each of the seven (7) areas of the face (see below image) for 3 minutes each. We recommend using the NuFACE Trinity Wrinkle Reducer at least five (5) times a week. This device should not be used more than 21 minutes in a 24-hour period. It is safe to use daily, if desired. The NuFACE Trinity Wrinkle Reducer is equipped with an auto shut-off feature, and will automatically shut off after 21 minutes of use.

If you choose to incorporate both the NuFACE Trinity Facial Trainer and  NuFACE Trinity Wrinkle Reducer attachments in your skin care regimen, always use the Trinity Wrinkle Reducer before the Trinity Facial Trainer.

Before Treatment

Step 1: Be sure that your Trinity device is fully charged. We recommend a full 12-hour charge before the first use. A full charge is indicated when all five (5) LEDs on the front of the device are illuminated when on the charger.

NOTE: The Trinity Wrinkle Reducer attachment uses more power than the Facial Trainer Attachment. Please be sure that your device is fully charged before use.

Step 2: Start by washing your face with an oil-free cleanser.

Step 3: Remove the Facial Trainer Attachment by pressing the button on the back of the Trinity device and gently lifting the attachment off of the device. Attach the Trinity Wrinkle Reducer by holding the button down and sliding the attachment on.

Step 4: Turn unit on by pressing the power button on the front of the device. There will be an audible beep and the Trinity Wrinkle Reducer will flash three (3) times to calibrate. Do not touch the Trinity Wrinkle Reducer until the unit has finished flashing.

Step 5: Adjust the intensity to the highest level by pressing the (+) button on the front of the device.

NOTE: The LEDs will not illuminate unless in direct contact with skin.

Treatment (21 minutes)

How to use the Trinity wrinkle remover

Step 1: On your clean, dry face apply your preferred NuFACE serum (optional) by tapping into your skin with your fingertips.

Step 2: Press Trinity Wrinkle Reducer on desired treatment area. The LEDs will not illuminate unless in direct contact with skin.

NOTE: If the Trinity Wrinkle Reducer is not touching the skin, the device will emit 3 beeps notifying you to apply more pressure.

Step 3: Treat each of the seven (7) sections of the face for 3 minutes each.
NOTE: The Trinity Wrinkle Reducer is equipped with an auto shut-off feature, and will automatically shut off after 21 minutes of use.

Finish

Step 1: Gently wipe off any product with a dry or slightly damp cloth. Never submerge your device in water, or use an excess of liquid when cleaning your device or attachment. Place device back on its charger.

Step 2: Apply your favorite NuFACE serum (optional) and preferred moisturizer.

NOTE: If you are following this treatment with the NuFACE Trinity Facial Trainer (microcurrent) treatment, do not apply your moisturizer at this time. A clean, dry face is necessary for the Facial Trainer treatments.