Battery Installation Instructions


INSTALLING THE BATTERY

STEP 1
Open the battery case by pressing on the downward arrow and sliding down. This process will remove the battery back cover, please keep near to complete installaion.

STEP 2
Take the 9 volt battery out of the plastic bag located underneath the plastic tray of your NuFACE® Kit.

STEP 3
Gently insert the 9 volt battery by lining up the positive and negative connectors correctly on the black battery strip. Press the battery into the battery strip to lock and secure the battery. (Be gentle when handling the battery strip as connecting wires are delicate.)

STEP 4
Place the battery into the battery pack with the red and black wires placed on top of the battery.

STEP 5
Obtain the black cover and align evenly with the tracks on the device until both pieces are flush to each other. Slowly glide the cover upwards until both bottom and top levers on the device snap together securely. Installation is now complete.

REMOVING THE BATTERY

OPEN
Open the battery case by pressing on the downward arrow and sliding it down. This process will remove the battery back cover; please keep near to complete installation.

REMOVE
Remove the 9 volt battery from battery pack. Securely hold the black battery strip and gently pull off the battery. (Always hold the black battery strip when disconnecting the battery as connecting wires are delicate.)

*NOTE - PLEASE USE DURACELL OR ENERGIZER BRAND BAT-TERIES ONLY.